Products
Downloads Login
Cello / Trumpet Servo Drive (Intelligent Digital Servo Drives)
Our intelligent digital servo drives support DC and AC brushless motors and feature a range of functionalities. These servo drives are fully integrated in distributed motion control environments via a serial interface and/or industrial, real-time communication protocols. These include CANopen DS 301 and a full implementation of DS 402. By incorporating a binary interpreter, the implementation of the CANopen protocol in the servo drives enables fast, simultaneous communication via CANopen and serial RS-232 lines.
Specifications
| Feature | Unit | 5 / 60 | 10 / 60 | 15 / 60 | 15RMS / 60 | 30 / 60 | 3 / 100 | 10 / 100 | 15 / 100 | 15RMS / 100 | 2 / 200 | 6 / 200 | 10 / 200 | 15 / 200 | 15RMS / 200 |
| Minimum Supply Voltage | VDC | 10 | 20 | 40 | |||||||||||
| Nominal Supply Voltage | VDC | 50 | 85 | 180 | |||||||||||
| Maximum Supply Voltage [over voltage trip] |
VDC | 59 | 95 | 195 | |||||||||||
| Maximum Output Power from the drive |
W | 250 | 510 | 760 | 1070 | 1530 | 270 | 820 | 1220 | 1730 | 380 | 990 | 1680 | 2510 | 3550 |
| Efficiency at Rated Power | % | > 97 | |||||||||||||
| Auxiliary Supply Voltage [ext.] | VDC | 24 ±20% | |||||||||||||
| Auxiliary Supply Power [ext.] | VA | 12 | |||||||||||||
| DC and Trapezoidal Communication Continuous Current Limit [lc] |
A | 5 | 10 | 15 | 15 | 30 | 3.3 | 10 | 15 | 15 | 2.25 | 6 | 10 | 15 | 15 |
| Sinusoidal Commutation Continuous RMS Current Limit [lc] |
A | 3.5 | 7.1 | 10.6 | 15 | 21.2 | 2.3 | 7.1 | 10.6 | 15 | 1.6 | 4.2 | 7.1 | 10.6 | 15 |
| Peak Current Limit [RMS] | A | 2 X lc | |||||||||||||
| Output Power without Additional Heat Sink |
% | 100 | 75 | 100 | 100 | 75 | 50 | ||||||||
| Weight | g [oz] | 640 [22.6] | |||||||||||||
| Dimension | mm [in] | 150 x 25.4 x 105[5.9 x 1 x 4.1] | |||||||||||||
| Digital In / Digital Out / Analog In | 10 / 5 / 2 | ||||||||||||||
*The Trumpet is a Current/Torque mode version of the Harmonica.
| Feature | Unit | Harmonica, Cello, Basson, Cornet, Tuba | |
| Output Voltage | % | >79 Vin | |
| PWM Switching Frequency | KHz | 22 ±5% default on the Motor | |
| Switching Method | Advanced Unipolar PWM | ||
| Current Loop | Bandwidth >2.5KHz | Sampling Rate >14KHz | |
| Velocity Loop | Bandwidth >350Hz | Sampling Rate >7KHz | |
| Position Loop | Bandwidth >80Hz | Sampling Rate >3.5KHz | |
| Maximum HeatSink Temperature | °C[°F] | 80°C[176°F] ±4° | |
| Ambient Operating Temperature | °C[°F] | 0° - 40°[32° - 104°F] | |
| models for extended environmental conditions are available | |||
| Storage Temperature | °C[°F] | -20° - 85°C[-4° - 185°F] | |
| Maximum Humidity | % | 90% non-condensing | |
| Maximum Operating Altitude | m (ft) | up to 10,000m [30,000ft] | |
| Protection Level | IP20 | ||
| Intelligent Digital Servo Drive | DC |
| Cello / Trumpet | |
| Motor | Brush |
| Operating Modes | Current , Velocity, Position & Adv. Pos. |
| Supply Voltage Range (VDC) | 10 ~ 195 |
| Continuous Output Current (A) | 2.25 ~ 30 |
| Output Power (KW) | 0.3 ~ 3.6 |
| Digital In , Out , Analog In |
10 / 5 / 2 |
| Communications | RS-232, CANopen DS 301 and DS 402 |
| Memory | Up to 32KB |
